Sofa Making Spray Adhesive 893 is a kind of benzene-free and
environmental friendly SBS type adhesive, which has many
* Super adhesion strength
* Cost-effective, small amount for large area
* Pleasant smell, easy apply without impurity
* Aging resistance
For most case making industry.
Cloth, Leather, Sponge, and ABS plastic etc, used for bags and
Tools: Spray Gun
200L Drums, 18L*1tin, 5L*4 tins, 3L*6 tins, 1L*12 tins, 0.75L*24
Six Correct Steps To Spray Adhesive
Step 1: Run the vantilation system in the construction locate, open
doors and windows to ventilate the place.
Step 2: Before construction, check the lance and let away the
seeper in the pressure pipe.
Step 3: Make the surfaces of the materil clean, avoid grease, dust
Step 4: Adjust the muzzle, and spray evenly.
Step 5: After even spray, lay it for 1-5 mn to agglutinate it, till
the coating is sticky to touch.
Step 6: Better to place some pressure when conglutination is done.
Muzzle from 45° Angle, better to keep a distance of 0.5m between
the muzzle and the surface of the material. The air-pressure of the
lance should be adjusted to 6-8kgs accordingly.
Sector Style: Plumb up the muzzle with the surface of the material
to spry even sector adhesive fog whose angle is approximately 45° .
Cautions during the spray
1, Separat the spray workshop from other workshopes, operator
should wear safety;
2, Move steadily and averagely, without pile up or lack of adheive;
3, Spray evenly to cover the material standardizing on 12 M2 per
kg. The coating should not be too thick.
4, For better effect, pls double-sided spraying and besmearing.
5, Clean out the lance when not in use.&
|Appearance||40 - 60 cps (very easy to apply)|
|Viscosity ( 25 ºC)||40 - 60 cps (very easy to apply)|
|Peel Strength||No peeling on the bonded surfuces|